Our curtains and Roman shades are made to order. Check the options on your chosen product before ordering, and give all measurements in either inches or centimeters.
One panel or a pair?
- Single Panel (1 curtain) means one curtain panel.
- Pair (2 curtains) means two curtain panels.
- For curtains, the selected width and height apply to each panel, unless the product description states otherwise.
How to measure curtains
- Measure the full curtain rod or track you want to cover, not just the window glass.
- Decide whether you need one panel or a pair. For gathered styles, allow extra fabric width for fullness; the amount depends on the header and the look you want.
- Measure your desired finished curtain length. The measuring start point depends on the header style. If you are unsure, email us a photo of your rod or track before ordering.
Pleated curtains: please confirm the required finished pleated width with us before ordering. Fabric width and finished pleated width are not always the same.
Calculate curtain fullness
For standard gathered curtains, we recommend a total flat curtain width of 1.5–2 times the rod or track width. Divide that total by the number of panels to find the width of each panel.
Example: a 50-inch rod with 2 times fullness needs 100 inches of curtain fabric in total: two panels at 50 inches wide each. Each panel's height is measured separately for your chosen header and desired drop.
For pinch pleats, confirm the finished pleated width with us; the flat fabric width and finished width differ.
Ordering a custom size
- Select the listed width and height that can accommodate your requested finished measurements. Where your exact size is not listed, choose the next larger available size.
- Select the number of panels, header style and lining offered on that product.
- After ordering, email or WhatsApp us your exact finished width × height and lining choice. State the units and the measurements for each panel. We confirm every measurement before we start.
Example: for two panels measuring 48 inches wide by 82 inches long each, choose a pair in the 50W x 84H inch size, if that option is offered. Send us: “Two panels, each 48 inches wide x 82 inches long.”
For help choosing a custom size, email us before ordering so we can confirm the measurements and the correct option to select. For different sizes in the same order, add each required size separately.
Common curtain lengths
| Length in inches | Length in centimeters |
|---|---|
| 36 | 91.44 |
| 48 | 121.92 |
| 60 | 152.4 |
| 72 | 182.88 |
| 84 | 213.36 |
| 96 | 243.84 |
| 108 | 274.32 |
| 120 | 304.8 |
| 132 | 335.28 |
| 144 | 365.76 |
| 156 | 396.24 |
| 168 | 426.72 |
| 180 | 457.2 |
50 inches = 127 cm. 100 inches = 254 cm. Not every fabric is available in these widths; follow the options on the individual listing.
Wide panels and seams
Our standard 50-inch curtain panel uses one fabric width. A 100-inch panel joins two 50-inch widths with a vertical seam; custom panels wider than 50 inches also need a join. Exact pattern alignment cannot be guaranteed. Contact us before ordering if seam placement or an uninterrupted pattern is important.
Choosing a header
- Rod Pocket: the rod passes through a fabric channel.
- Back Tab: the rod passes through tabs on the back of the curtain.
- Grommet (Eyelet): the rod passes through rings in the curtain top. Check the listing for ring material, finish and compatibility.
- Hook Top: hooks attach to heading tape for use with a compatible track or curtain rings.
- Double Pinch Pleat, Triple Pinch Pleat and Euro Pleat: tailored pleated headers, available only where listed.
Header availability and included hardware vary by product.
Lining choices
- Standard: soft light filtering.
- Privacy Light Filtering: adds privacy and body while allowing some daylight through.
- Blackout: a blackout liner for stronger light blocking. Light can still enter around the edges of the installed curtain.
Choose among the options offered on the product. After ordering, email or WhatsApp us your lining preference, or contact us before ordering if you need help choosing.
Roman shade measurements
Maximum single shade width: 50 inches. For windows wider than 50 inches, contact us to plan two or more shades before ordering.
Tell us whether you want an inside-recess or outside-recess mount. For an inside mount, measure the opening at several points and send us the measurements. For an outside mount, measure the full area you want the shade to cover. Do not make fitting deductions without confirming them with us. Check the size range and any seam or hardware notes on the Roman shade listing.
Need help? Email feedbackexports@gmail.com with the product name, window or rod measurements, a photo if helpful, and the style you prefer. We can help you confirm the correct selection before you order.